







UA300 Utility ATV — 300cc Water-Cooled Quad with 12-Inch Alloy Wheels
The UA300 uses the JL/F300 single-cylinder, water-cooled 4-stroke OHC engine in a horizontal layout with a balance shaft, which keeps vibration low through a full working day. It produces 13.5 kW at 6500 rpm and 22.5 N·m at 5000 rpm from 72.5 × 66.8 mm bore and stroke at 10:1 compression, fed by a PD30 carburettor with CDI ignition — carburettor rather than EFI, so any workshop in your market can service it without diagnostic equipment. Drive runs through a CVT gearbox with Reverse, Neutral and Forward. The chassis carries 12-inch alloy rims with 25×8-12 front and 25×10-12 rear tyres, front and rear disc brakes with a parking brake, dual rocker arm independent front suspension and a single vertical arm rear, with 375 mm front and 400 mm rear shock travel. Ground clearance is 205 mm on a 1380 mm wheelbase, with a 950/840 mm front and rear track. Rated load is 180 kg, dry weight 252 kg, top speed 80 km/h, and the machine measures 2080×1170×1280 mm.
Spécifications techniques
| UA300 ATV Technical Specifications (12-inch Wheels) | |
|---|---|
| Type de moteur | JL/F300CVT single cylinder, water cooled, 4-strokes, overhead camshaft, horizontal type, balance shaft |
| Alésage * Course | 72.5*66.8mm |
| Taux de compression | 10:01 |
| Puissance maximale | 13.5kW/6500 r/min |
| Max torque | 22.5 N•m/5000 r/min |
| Transmission system | CVT(RNF) |
| Ignition mode | CDI |
| Carburateur | PD30 |
| Rapport d'entraînement | 530-18/530-37 |
| Réservoir d'essence | Steel 10L |
| Système de frein à disque | F&R disc with parking |
| Roue avant et arrière | F&R 12 inch alloy rim |
| Front tyre | 25*8-12 |
| Pneu arrière | 25*10-12 |
| Suspension avant | Dual rocker arm independent suspension |
| Rear suspension | Single vertical arm non-independent suspension |
| Front shock | 375mm unadjustable |
| Rear shock | 400mm unadjustable |
| Hauteur du siège | 920mm |
| Empattement | 1380mm |
| Max speed | 80km/h |
| Autorisation | 205mm |
| L*L*H | 2080x1170x1280mm |
| Front wheel base | 950mm |
| Rear wheel base | 840mm |
| Charge maximale | 180 kg |
| Poids | 252KG |
| Taille du paquet du cadre en acier | 2030x1100x830mm |
| Taille du paquet | 2050x1120x790mm |
| Max package weight | 300±2KG |


